Navigation Manual
Some DVD-Video discs only contain Dolby Digital 5.1
(AC-3) or DTS 5.1 audio tracks and may not allow
conversions into stereo modes.
See “Adjusting the Speakers” under Navigation Audio
System on page 3-2 Navigation Audio System for
more information.
DVD Messages
If Disc Read Error appears on the display and/or the
DVD comes out, it could be for one of the following
reasons:
• A disc was inserted with an invalid or
unknown format.
• The disc is not from a correct region.
• The map DVD disc was installed into the
DVD audio/video slot. See “Installing the
Map DVD” under Maps on page 2-4.
• It is very hot. When the temperature returns
to normal, the DVD should play.
• You are driving on a very rough road. When the
road becomes smoother, the DVD should play.
• The DVD is dirty, scratched, wet, or upside down.
• The air is very humid. If so, wait about an hour
and try again.
• There may have been a problem while burning
the DVD.
• The label may be caught in the DVD player.
If the DVD is not playing correctly, for any other reason,
try a known good DVD.
If any error occurs repeatedly or if an error cannot
be corrected, contact your dealer/retailer.
3-23










