2008 Outlook Automobile Owner's Manual
Table Of Contents
- 2008 Saturn OUTLOOK BookTOC
- Seats and Restraint Systems
- Features and Controls
- Instrument Panel
- Instrument Panel Overview
- Hazard Warning Flashers
- Other Warning Devices
- Horn
- Tilt and Telescopic Steering Wheel
- Power Tilt Wheel and Telescopic Steering Column
- Turn Signal/Multifunction Lever
- Turn and Lane-Change Signals
- Headlamp High/Low-Beam Changer
- Flash-to-Pass
- Windshield Wipers
- Windshield Washer
- Rear Window Wiper/Washer
- Cruise Control
- Exterior Lamps
- Delayed Headlamps
- Daytime Running Lamps (DRL)/Automatic Headlamp System
- Fog Lamps
- Instrument Panel Brightness
- Courtesy Lamps
- Dome Lamps
- Dome Lamp Override
- Entry Lighting
- Delayed Entry Lighting
- Delayed Exit Lighting
- Parade Dimming
- Reading Lamps
- Electric Power Management
- Battery Run-Down Protection
- Accessory Power Outlet(s)
- Power Outlet 115 Volt Alternating Current
- Climate Controls
- Warning Lights, Gages, and Indicators
- Instrument Panel Cluster
- Speedometer and Odometer
- Tachometer
- Safety Belt Reminders
- Airbag Readiness Light
- Passenger Airbag Status Indicator
- Charging System Light
- Voltmeter Gage
- Brake System Warning Light
- Antilock Brake System (ABS) Warning Light
- StabiliTrak® Indicator Light
- Engine Coolant Temperature Warning Light
- Engine Coolant Temperature Gage
- Tire Pressure Light
- Malfunction Indicator Lamp
- Oil Pressure Light
- Security Light
- Fog Lamp Light
- Cruise Control Light
- Highbeam On Light
- Tow/Haul Mode Light
- Fuel Gage
- Driver Information Center (DIC)
- Audio System(s)
- Setting the Clock
- Radio(s) (MP3)
- Using an MP3 (Radio with CD and Six-Disc CD Player)
- Using an MP3 (Radio with CD and DVD Player)
- XM Radio Messages
- Navigation/Radio System
- Rear Seat Entertainment (RSE) System
- Rear Seat Audio (RSA)
- Theft-Deterrent Feature
- Audio Steering Wheel Controls
- Radio Reception
- Multi-Band Antenna
- Instrument Panel Overview
- Driving Your Vehicle
- Your Driving, the Road, and the Vehicle
- Defensive Driving
- Drunk Driving
- Control of a Vehicle
- Braking
- Antilock Brake System (ABS)
- Braking in Emergencies
- StabiliTrak® System
- All-Wheel Drive (AWD) System
- Steering
- Off-Road Recovery
- Passing
- Loss of Control
- Driving at Night
- Driving in Rain and on Wet Roads
- Before Leaving on a Long Trip
- Highway Hypnosis
- Hill and Mountain Roads
- Winter Driving
- If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow
- Rocking Your Vehicle to Get It Out
- Loading the Vehicle
- Towing
- Your Driving, the Road, and the Vehicle
- Service and Appearance Care
- Service
- Fuel
- Checking Things Under the Hood
- Hood Release
- Engine Compartment Overview
- Engine Oil
- Engine Oil Life System
- Engine Air Cleaner/Filter
- Automatic Transmission Fluid
- Engine Coolant
- Radiator Pressure Cap
- Engine Overheating
- Overheated Engine Protection Operating Mode
- Cooling System
- Power Steering Fluid
- Windshield Washer Fluid
- Brakes
- Battery
- Jump Starting
- All-Wheel Drive
- Headlamp Aiming
- Bulb Replacement
- Windshield Wiper Blade Replacement
- Tires
- Tire Sidewall Labeling
- Tire Terminology and Definitions
- Inflation - Tire Pressure
- Tire Pressure Monitor System
- Tire Pressure Monitor Operation
- Tire Inspection and Rotation
- When It Is Time for New Tires
- Buying New Tires
- Different Size Tires and Wheels
- Uniform Tire Quality Grading
- Wheel Alignment and Tire Balance
- Wheel Replacement
- Tire Chains
- If a Tire Goes Flat
- Tire Sealant and Compressor Kit
- Changing a Flat Tire
- Removing the Spare Tire and Tools
- Removing the Flat Tire and Installing the Spare Tire
- Secondary Latch System
- Storing a Flat or Spare Tire and Tools
- Compact Spare Tire
- Appearance Care
- Interior Cleaning
- Fabric/Carpet
- Leather
- Instrument Panel, Vinyl, and Other Plastic Surfaces
- Care of Safety Belts
- Weatherstrips
- Washing Your Vehicle
- Cleaning Exterior Lamps/Lenses
- Finish Care
- Windshield, Backglass, and Wiper Blades
- Aluminum or Chrome-Plated Wheels and Trim
- Tires
- Sheet Metal Damage
- Finish Damage
- Underbody Maintenance
- Chemical Paint Spotting
- Vehicle Care/Appearance Materials
- Vehicle Identification
- Electrical System
- Capacities and Specifications
- Maintenance Schedule
- Maintenance Schedule
- Introduction
- Maintenance Requirements
- Your Vehicle and the Environment
- Using the Maintenance Schedule
- Scheduled Maintenance
- Additional Required Services
- Maintenance Footnotes
- Owner Checks and Services
- At Each Fuel Fill
- At Least Once a Month
- At Least Once a Year
- Recommended Fluids and Lubricants
- Maintenance Replacement Parts
- Engine Drive Belt Routing
- Maintenance Record
- Maintenance Schedule
- Customer Assistance Information
- Index
9. Push the On/Off button (B).
The tire sealant and compressor kit will inject
sealant and air into the tire. Sealant may leak from
the puncture until the vehicle is driven and the
hole has sealed.
The pressure gage (C) will initially show a high
pressure while the compressor pushes the sealant
into the tire. Once the sealant is completely
dispersed into the tire, the pressure will quickly drop
and start to rise again as the tire inflates with air only.
10. Inflate the tire to the recommended inflation
pressure using the air pressure gage (E) on the top
of the unit. The recommended inflation pressure
can be found on the Tire and Loading Information
label. See Inflation - Tire Pressure on page 5-56.
The pressure gage reading is slightly high while the
compressor is on. Turn the compressor off to get
an accurate reading. The compressor may be turned
on and off until the correct pressure is reached.
Notice: If the recommended pressure cannot be
reached after 20 minutes, the vehicle should not
be driven farther. Damage to the tire is severe and
the sealant will not be effective. Remove the air
compressor plug from the accessory power outlet
and unscrew the inflating hose from the tire valve.
See Roadside Assistance Program on page 7-7 for
more information.
11. Turn the compressor off by pushing the On/Off
switch (B).
Steps 12 through 20 must be done immediately
after Step 11.
The tire is not sealed and will continue to leak
air until the vehicle is driven and the sealant
is distributed in the tire.
Be careful while handling the tire sealant and
compressor kit as they could be hot after usage.
12. Unplug the air compressor accessory plug (E) from
the accessory power outlet in the vehicle.
13. Disconnect the sealant/air hose (F) from the tire
valve stem by turning it counterclockwise and
replace the tire valve stem cap.
14. Wrap the sealant/air hose (F) around the air
compressor channel to stow it in its original location.
15. Stow the air compressor accessory plug (E)
back into place.
5-78