Navigation Manual

8. Enter the street name using the alpha keypad
on the screen.
Do not enter directional information or street
type, and use the space symbol screen button
(
U ) between street or city names. For
example, the street name N. Royal Oak
Rd. should be entered as royal
U oak.
Use the backspace (
V ) screen button if an
incorrect character has been entered.
9. Select the desired street name from the list by
touching the screen button next to the correct
street name.
10. Enter the address number using the numeric
keypad on the screen. You may first have to
select the correct range for the address
number, then enter the desired address and
touch the OK screen button. The map
screen will display.
11. Touch the Set Destination screen button. The
address entry is now complete.
12. Touch the Route screen button.
13. Touch the Start screen button.
14. Once you begin driving you will hear an audio
prompt to “Proceed to the highlighted route.”
You are now in route guidance mode.
Entering a Point of Interest (POI)
To set a destination by entering a Point of Interest
(POI), do the following:
1. If a DVD map disc is not currently loaded, see
“Loading a DVD Map Disc” earlier in this
section. If a map disc is currently loaded,
proceed to Step 2.
2. Press the power/volume knob to turn the
system on.
3. Touch the Dest screen button.
13