Navigation Manual

Setting the Time

To set the time, do the following:

1. Press the power/volume knob to turn the

system on.

2. Press the CONFIG hard key.

3. Touch the Clock screen button.

4. Scroll through the Time Zones until the

desired time zone is highlighted.

5. Touch the Daylight Savings screen button.

The time is now set. Touch the Manual Adjust

screen button if you need to further adjust the time.

The radio will use the GPS satellite to set the

time. The vehicle needs to be in an open area to

receive the signal. See Global Positioning

System (GPS) on page 56 for more information.

Loading a DVD Map Disc

To load a DVD map disc, do the following:

1. Press the power/volume knob to turn the

system on.

2. Press and hold the eject key to tilt the screen

forward.

3. Insert the DVD map disc into the DVD slot.

Notice: Pressing directly on the navigation

screen may cause damage. Repairs would not

be covered by your warranty. Do not press

directly on the navigation screen.

4. To close the screen, slightly push up on the two

outer top corners until the screen is in position,

then push the screen in, by pushing on the four

outer corners, until you hear a click.

5. A notice may appear. Touch the Next screen

button to proceed.