Navigation Manual

Storing Radio Station Presets
To set preset radio stations:
1. Press the
O (power) knob to turn the
system on.
2. Press the AUDIO hard key and select the
desired band (AM, FM1, FM2, XM1, or
XM2 (if equipped)).
3. Use the
f (tune) knob or the SEEK arrows to
go to the desired station.
4. Press and hold one of the five preset screen
buttons, at the bottom of the screen, until you
hear a beep or see the station displayed
on the selected preset button.
5. Repeat the steps for each preset.
See “Storing Radio Station Presets” under
Navigation Audio System on page 56 for more
information.
Setting the Time
To set the time:
1. Press the
O (power) knob to turn the
system on.
2. Press the MENU key to enter the configure
menu options, then press the MENU key
repeatedly until the time is selected or select
the time screen button.
3. Press the Set screen button.
4. Press the Hours and Minutes − (minus) and
+ (plus) signs to decrease or to increase
the time.
See “Setting the Time” under Configure Menu on
page 44 for more information.
9