Get To Know Manual
5
scroll through the features that can be
personalized using the DIC:
1. Turn on the ignition and place the
vehicle in Park.
2. Press the (Menu) button
until PERSONAL PROGRAM is
displayed.
3. Press the (Set/Reset) button
to begin.
4. Press the button to display each
available feature.
5. Press the button to change the
setting of each feature.
Personal Program features may include:
• Factory Default — Resets all
Personal Program features to the
factory settings
• Exterior Light Delay — The amount of
time the exterior lamps will remain on
after the vehicle is turned off
• Interior Lights Keys Removed — The
interior lights will remain on a short
period after the key is removed from
the ignition
• Delayed Locking — Locks all doors a
few seconds after all doors have
been properly closed
• Content Theft — The status of the
Content Theft-Deterrent System
alarm
• FOB Lock Feedback — The feedback
received when locking the vehicle
with the RKE transmitter
• Remote Start — The status of the
Remote Start function
• Rear Park Chime — Warning chimes
sound when the system detects a
person or object close to the rear of
the vehicle when in Reverse
• Personalize Key — Saves radio
station presets and Personal Program
selections to a specific ignition key
• Automatic Door Unlocking —
Automatically unlocks the driver’s
door or all doors
• Auto Unlock On — Unlocks the
driver’s door or all doors when the
key is removed from the ignition or
when the vehicle is shifted into Park
• FOB Unlock on First Press — The
first press of the unlock button on the
RKE transmitter will unlock the
driver’s door or all doors
To exit Personal Program, you must
press the Unlock button on the RKE
transmitter (key fob). This will save all
settings.
To display the odometer, press the
button.
Compass
Your vehicle’s compass may need to be
calibrated from time to time as a result
of certain environmental conditions
(such as being close to power lines or
other strong electromagnetic fields).
The compass may recalibrate itself
during normal driving, but to initiate
calibration:
1. Press the (Menu) button
until FOR COMPASS CALI-
BRATION is displayed.
2. Press and hold the (Set/Reset)
button.
3. The DIC will display CALIBRATION
BEGUN – DRIVE UNTIL DONE.
Make two full-circle turns (an open
parking lot is best for this). When
completed, CALIBRATION FINISHED
will be displayed.
See Section 3 of your Owner Manual.