Owner`s manual
Setting
the
option
menu
for
each
input
source
(Option
menu)
Signal
Info
Input source:
HDMIl-4,
AVI-4, USB
Displays information on audio and video signals on the
QUI
screen and front panel display. You can change items
to be displayed using
IlIDCursor
f1
/
\j.
• Audio information
Decoder Mode
Input source:
HDMIl-4,
AVI-4
Choices:
Auto*,OTS
Selects
DTS"
digital audio signals for reproduction.
Auto Automatically selects audio input signals.
DTS Selects DTS signals only. Other input signals
are not reproduced.
Extended Surround
Input source:
HOMII-4,
AVI-4
Choices: Auto*, PLIIxMovie, PLIIxMusic, EXlES,
Off
Selects whether to reproduce multi-channel input signals
in 6.1-
or
7.I-channel when surround back speakers are
used.
• HDMI error message
(appears only when an error has occurred)
• "No Signa'"
is
displayed when
no
signals are input and "
__
0"
is
displayed
when
signals that this unit cannot recognize are input.
• The bit rate
may
vary
during playback.
HOCP authentication failed.
The connected monitor is not compatible
with the video input signal.
Format and resolution
of
video input
signal.
The number
of
HOM! components
connected is over the limit.
Format and resolution
of
video output
signal.
Error messages about HOMI signals and
HOMI components. See the following for
details
of
the error messages.
The bit rate
of
input signal per second.
The sampling frequency per second
in
analog-to-digital conversion.
Receives in stereo mode by priority.
Receives in monaural mode.
You
can get a
better reception
in
monaural mode.
HDCPError
Device Over
Message
Video
In
Video Out
Out
of
Res.
Bitrate
Sampling
Frequency
Auto
Mono
Auto Preset
Input source: TUNER
Automatically detects
FM
radio stations and registers
them as preset stations (page 29).
Notes
Note
• (U.S.A. model only)
Select "Auto"
to
tune into
HD
Radio stations. When "Mono"
is
selected,
you
can
tune into analog stations only.
Audio Mode
Input source: TUNER
Choices: Auto*, Mono
Sets
FM
(or
HD
Radio) broadcasting receiving mode.
• Video information
Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1-
or
7.1-
channel.
Always reproduces signals in 6.1-
or
7.1-
channel using the PLIIxMovie decoder
whether
or
not surround back channel signals
are contained. You can select this parameter
when two surround back speakers are
connected.
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMusic decoder whether
or
not surround back channel signals are
contained. You can select this parameter when
one
or
two surround back speakers are
connected.
Automatically selects the most suitable
decoder for input signals whether
or
not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
PLIIx
Music
Off
E)etES
Auto
PLIIx
Movie
Format
Channel
Format
of
digital audio signals.
The number
of
input signal channels
(frontisurroundILFE).
For example,
if
input signal channels are
3 front channels, 2 surrounds and LFE,
"312/0.1" is displayed.
If
a channel that cannot be expressed as
the above, a total number
of
channels
such as "5.1 ch" may be displayed.
,I,
~<il~
• (U.S.A. model only)
Automatically detects
FM
and
AM
HD
Radio stations
and
analog
FM
radio stations
and
registers them
as
preset stations.
Clear Preset
Input source: TUNER, XM, SIRIUS
Clears preset station (TUNER: page 30, XM: page 35,
SIRIUS: page 39).
Parental Lock
Input source: SIRIUS
Set the Parental Lock (page 40).
48
En