Owner`s manual

Connections
lion on jacks and cable plugs
This unit has the following input and output jacks. Use jacks and cables appropriate for components that you are
connecting.
• Audicl jacks
• Video/audio jacks
Jack Emd cables Description Jack and cables
Description
Po Po
,--
000
- - - - - - - - -(> Converted
To transmit digital video and
digital audio signals. Use HDMI
cables.
:...... ; c
,... .. ... -
.. "' .... ", ..
Output
-------., .. ~ -l )
---~
...... ...'"
-----I .. ~ Through
Input
Po Po
--
000
This unit automatically converts input video signals and
outputs the signals to the HDMI OUT jack and
MONITOR OUT (COMPONENT VIDEO and
VIDEO) jacks (video conversion).
HDMI jacks
lHD",J~8>-
,I,
~<i>~
• We recommend that you use a commercially available 19-pin HDMl
cable
no longer than 5 meters (16 feet) with the HDMllogo printed on it.
• Use a conversion cable (HDM! jack H DVl-D jack) to connect this unit
to other DVl components.
•
You can check the potential problem about the HDM! connection
(page 48).
Description
To transmit conventional
composite video signals. Use video
pin cables.
To transmit optical digital audio
signals. Use optical fiber cables for
optical digital audio signals.
To transmit coaxial digital audio
signals. Use pin cables for digital
audio signals.
To transmit conventional analog
stereo audio signals. Use stereo pin
cables. Connect red plugs to red
jacks (R) and white plugs to white
jacks (L).
VIll£O
~ ... (-~
(yellow)
VIDEO jac:ks
Jack and cables
~ -~
4> -~
(red)
OPTICAL jacks
COAXIAL jacks
(orange)
~~-~
COoIXlAL
Analog audio jacks
(white)
• Vide() jacks
COMPONIENT VIDEO
jacks
COMPONEHT
VIDEO
p,~~-
(red)
PB~ ~L. Pal 0-+-
(blue)
y~ .... ~
(green)
To transmit component video
signals that include luminance (Y),
chrominance blue
(PH) and
chrominance red
(PR) components.
Use component video cables.
I
13 En