Owner`s manual

Quick start guide
When you use this product for the first time, perform setup following the steps below. See the related pages for details on
operations and settings.
Step 1: Prepare items for setup
Step
2: Set up your speakers
Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
7.l-channel sound system.
Place your speakers in the room and connect them to this
unit.
• Placing speakers
• Connecting speakers
Front right speaker
Surround left speaker
Step 3: Connect your components
• Connecting a TV monitor or projector
• Connecting other components
• Connecting a multi-format player or an
external decoder
~P. 16
• Connecting an external amplifier ~p. 16
• Connecting a USB storage device ~P. 17
• Connecting a Yamaha iPod universal dock or
Bluetooth wireless audio receiver
~P. 17
• Connecting the FM and AM antennas ~P. 18
• Connecting an XM Mini-Tuner Home Dock ~P. 33
• Connecting a SiriusConnect tuner
~P. 37
Connect your
TV, DVD player, or other components.
,',
~tfl~
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (Q"P. 19).
2
qty.
Subwoofer
f
~""d"d<
right speaker
Surround Back
left speaker
Center speaker
Front speaker
Requirements
Video monitor
Components
(such as
DVD player)
Speakers
Surround speaker
Surround back
speaker
2
2
Step 4: Turn on the power
Connect the power cable and tum on this unit.
Active subwoofer
Speaker cable
7
• Connecting the power cable
• Turning this unit on and off
Subwoofer cable
Reproduction
component such as OVO player
Video
monitor such as TV
Video cable
or HOMI cable
2
Step 5: Select the input source and start
playback
Select the component connected in step 3 as an input
source and start playback.
'"
~tfl~
• Prepare two magnetically shielded speakers (for front). The priority of
the requirement of other speakers is as follows:
I Two surround speakers
2 One center speaker
3 One (or two) surround back speaker(s)
• If your video monitor is a CRT, we recommend that you use magnetically
shielded speakers.
• Video and audio cables are unnecessary if you use HDMI cables.
Audio cable 2
• Basic procedure
• Selecting sound field programs
,',
~tfl~
• This unit supports the SCENE function (page 22) that changes the input
source and sound field program at one time. Four scenes are preset for
different purposes for Blu-ray disc, DVD and CD, and you can select
from a scene from those just by pressing a remote control key.
8En