User manual

~ 8 ~
HDMI-SPL-2202C
Relays HDMI signals to next cascading device with one local display
1. Switch off all devices, including monitors.
2. Connect a local HDMI display to the HDMI Out of the HDMI-SPL-2202C and then connect a speaker to the
3.5mm audio socket.
3. Connect to HDMI-SPL-2202C via RJ-45 in by a CAT5 cable.
4. Connect to next HDMI-SPL-2202C (for cascading), to HDMI-EXT-0101C-RX (to HDTV at long range), or
HDMI-EXT-1111C-RX (to HDTV at mid range) via RJ-45 out by a CAT5 cable.
5. Plug in 5V 4A DC power supply.
6. Power on the HDTV.
Speaker
HDMI cable
Audio cable
HDTV
CAT5 cable
CAT5/6 cable
HDMI-SPL-2201C
HDMI-SPL-2202C
HDMI-SPL-2202C
HDMI-EXT-0101
C
-RX
HDMI-EXT-1111
C
-RX