User manual

~ 5 ~
HDMI-SPL-2201C 1x2 HDMI 1.3 over Single CAT5 Splitter
1. Input signal format indicator [bright: HDMI signal, dim: DVI signal]
2. DIP switch [see table below]
3. HDMI IN: Connect a HDMI source with a HDMI M-M cable here
4. Audio OUT: Plug in a local speaker here
5. HDMI OUT: Connect to a HDMI display with a HDMI M-M cable here
6. HDMI Signal OUT: Link to SP-5012 for cascading; or link to HDMI-EXT-0101C-RX or
HDMI-EXT-1111C-RX to another HDMI display with a Cat-5/5e/6 cable
7. +5V DC: Connect to 5V 4A DC power supply
DIP Switch for EDID & Audio/Video settings
DIP Switch Position
Video Audio Description
Pin#1 Pin#2
OFF [©] OFF [©] Up to 1080p
Stereo
1
Default Mode
2
– Up to 1080p & stereo audio output for
most HDTVs
OFF [©] ON [ª]
Up to
720p/1080i
Stereo
Safe Mode
3
– Enforce the system output at 720p/1080i
video and stereo audio for basic compatibility among HDTVs
ON [ª] OFF [©]
Bypass
4
Bypass
4
EDID Learning Mode
5
– for learning EDID from the display
while playing any received HDMI audio format
ON [ª] ON [ª]
Bypass Stereo
EDID Learning & Stereo Mode
5
– for learning EDID from the
display while enforcing stereo output if any HDTV cannot
play surround sound normally
Panel
D
escri
p
tions
1 2 3 4
56
7