User manual

44
GB
Switch and indicators
A)On/off indicator green
B)Thermostat and on/off switch
C)Quick freeze indicator yellow
D)Acoustic signal stop and quick freeze switch
E) Alarm indicator red
Operation and use
Installation
Insert the plug into the socket. In order to switch on the
product, turn the thermostat (B) to a temperature lower
than << 1 >>. The green indicator will light up and the
red indicator will blink. The lighting up of the on/off indi-
cator (A) means that the product is switched on. The
blinking of the red indicator means an improper temper-
ature in the freezing compartment. In addition, an inter-
mittent sound can be heard, which can be stopped by
pressing button (D) once. You can switch off the freez-
er by turning the thermostat (B) in position << >>.
Adjusting the temperature
The internal temperature of the freezer is regulated
electronically through five temperature positions and a
switch-off << >> setting.
Position << 1 >> indicates the highest (least cold) tem-
perature, while position << 6 >> is for the lowest (cold-
est) temperature. Rotate the thermostat in the desired
position.
In general, it is best to set the thermostat to << 2-3 >>
but, for the purpose of temperature setting, you should
also consider
the temperature of the room where the product is
installed,
the frequency of door openings,
the volume of food to be stored in the product,
the location of the product.
Therefore, you should consider all these factors and
you may have to do some testing for finding the best
temperature. If you want a lower temperature, turn the
thermostat into a position of higher number or, vice
versa, if you need a higher temperature, you should set
a position of lower number. Please allow 24 hours for
the freezer temperature to stabilize between two adjust-
ments.
Alarm (red) indicator
The temperature alarm indicator (E) will light up when
the internal temperature of the freezer increases to a
level (above -12°C) where the long-term conservation
of the foods in not ensured. Please note that, when
switching on the freezer for the first time, the alarm indi-
cator will blink until the internal temperature has
reached a level required for the safe conservation of
frozen food.
Temperature problem: