User manual

Problem Possible cause Solution

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect another electrical appli-

ance to the mains socket. Check

fuse. Contact a qualified electri-

cian.

The lamp does not work. The lamp is defective. Refer to "Replacing the lamp".

The door has been open to long. Close the door.

Door interferes with ven-

tilation grill.

The appliance is not levelled. Refer to "Levelling".

Misaligned door. The appliance is not levelled. Refer to "Levelling".

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

1. Disconnect the appliance from the

power socket.

2. Press the spring and at the same time

pull the cover downwards.

3. Replace the bulb (E14 socket) with one

of the same power and specifically de-

signed for household appliances. (the

maximum power is shown on the light

diffuser).

4. Reconnect the appliance.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Service Center.