User manual

Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
are recyclable.
CONTROL PANEL
ACTION
F
REEZE
1234
5
1
ON/OFF button
Pilot light
2
Temperature indicator
3
Temperature regulator button, + and -
4
Action Freeze button
Action Freeze light
5
Alarm reset button
Alarm light
Switching on
Insert the plug into the wall socket.
If the pilot light and the display is not illumi-
nated, press ON/OFF button.
Select a temperature according to "Tem-
perature regulation".
Important! If the door remains open for
some minutes, the light will turn off
automatically. The light is reset by closing
and opening the door.
Switching off
To turn off the appliance, press the ON/OFF
button for approx. one second.
The pilot light will switch off.
Temperature regulation
The temperature can be adjusted between
-15°C and -24°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashed indicator.
• To set a warmer temperature, press
Temperature regulator +.
• To set a colder temperature, press Tem-
perature regulator -.
The Temperature indicators show the set
temperature.
The set temperature will be reached within
24 hours.
Important! After a long period out of use it
is not necessary to set again the
temperature because it remains stored.
A medium setting is generally the most
suitable.
The exact setting should be chosen keep-
ing in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Action Freeze function
You can activate the Action Freeze function
by pressing the Action Freeze button.
The Action Freeze light will light up and the
Temperature Indicator show A.
This function stops automatically after 52
hours.
4