User manual

CONTROL PANEL
56 4 3 2
1
1
Display
2
Temperature warmer button
3
Temperature colder button
4
OK button
5
Mode button
6
ON/OFF button
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Mode button and Temperature colder
button for some seconds. Change is rever-
sible.
Display/Indicator
3 4 5 621
1
Timer indicator
2
FROSTMATIC function
3
Minute Minder function
4
Child Lock function
5
Alarm indicator
6
Temperature indicator
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer could operate after
few seconds.
To reset the alarm refer to “High tem-
perature alarm”.
4. If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if..." paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature refer to
"Temperature regulation".
Important! If the door remains open for
some minutes, the light will turn off
automatically. The light is reset by closing
and opening the door itself.
Switching off
To switch off the appliance do these steps:
1. Press the ON/OFF button for few sec-
onds.
2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug from
the power socket.
Temperature regulation
The set temperature of the freezer may be
adjusted by pressing the temperature but-
ton.
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be reached within
24 hours.
Important! After a power failure the set
temperature remains stored.
FROSTMATIC function
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
The FROSTMATIC indicator is shown.
This function stops automatically after 52
hours.
55