User manual

OPERATION
Switching on
B
C
A
A Temperature Regulator
B Half Loaded position
C Full Loaded position
Insert the plug into the wall socket.
Turn the Temperature Regulator to the Full
Loaded position and let the appliance run
for 24 hours to allow the correct tempera-
ture to be reached before placing food in-
side.
Adjust the Temperature Regulator accord-
ing to the quantity of the stored foods.
Switching off
To turn off the appliance, turn the Tempera-
ture Regulator to the “OFF” position.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature Regulator toward
lower settings to obtain the minimum
coldness.
• turn the Temperature Regulator toward
higher settings to obtain the maximum
coldness.
In case of freezing less food volumes,
the Half Loaded setting is the most
suitable.
In case of freezing much food volumes,
the Full Loaded setting is the most suit-
able.
CONTROL PANEL
21 3
1
Temperature regulator
2
Pilot light
3
High temperature alarm light
High temperature alarm
An increase in the temperature in the freez-
er (for example due to an power failure) is
indicated by switching on of the Alarm light
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.
FIRST USE
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
44