User manual

Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
Door reversibility
Important! To carry out the following oper-
ations, we suggest that this be made with
another person that will keep a firm hold on
the doors of the appliance during the oper-
ations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power socket.
• Tilt back the appliance carefully so that
the compressor cannot touch the floor.
• Remove the plinth.
• Unscrew and remove the lower hinges.
• Remove the door.
2
1
• Unscrew the upper pin and screw it on
the opposite side.
•Refit the door.
• Make sure the edge of the door is paral-
lel with the edge of the top.
A
B
• Unscrew the pin (A) and screw it on the
opposite side.
• Remove the cap (B) and position it on
the opposite side.
• Screw the lower hinges.
• Refit the plinth.
• Stand the appliance upright.
51