User manual

1. Press the Mode button until the
FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
3. The FROSTMATIC indicator goes off.
Important! The function switches off by
selecting a different freezer set temperature.
Minute Minder function
The Minute Minder function is to be used to
set an acoustic alarm at the preferred time,
useful for example when a recipe requires
to cool down a mixture for a certain length
of time, or when a reminder is needed in or-
der not to forget the bottles placed in the
freezer for fast cooling.
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30 mi-
nutes) for a few seconds.
2. Press the Temperature colder button or
the Temperature warmer button to
change the Timer set value from 1 to
90 minutes.
3. Press the OK button to confirm.
The Minute Minder indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Minute
Minder indicator flashes and an audible
alarm sounds:
1. Remove any drinks contained in the
freezer compartment.
2. Press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown:
1. Press the Mode button until the Minute
Minder indicator flashes.
2. Press the OK button to confirm.
3. The Minute Minder indicator goes off.
It is possible to change the time during the
countdown and at the end by pressing the
Temperature colder button and the Tem-
perature warmer button.
High temperature alarm
Temperature increase in the freezer com-
partment (for example due to an earlier
power failure or door is open) is indicated
by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then show
again the set temperature.
4. The alarm indicator continue to flash
until the normal conditions are restored.
Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door open
alarm conditions are indicated by:
• flashing alarm indicator
• acoustic buzzer.
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm phase, the buzzer can be
switched off by pressing any button.
FIRST USE
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
45