Operator`s manual

Fonts XB & XL
Command Structure Font XB: <ESC>XBa
Font XL: <ESC>XLa
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing of font (see notes below)
Example: <ESC>XB1123456
Placement: Preceding the data to be printed
Default: None
Command Function To print text images on a label. These are the two auto-smoothing
fonts available on the printer.
XB 48W x 48H dot matrix
XL 48W x 48H dot matrix
Input to Printer: ESC>A
<ESC>H0001<ESC>V0100<ESC>XB0SATO
<ESC>H0001<ESC>V0185<ESC>XB1SATO
<ESC>H0001<ESC>V0270<ESC>XL0SATO
<ESC>H0001<ESC>V0355<ESC>XL1SATO
<ESC>Q1<ESC>Z
Printer Output:
Special Notes 1. Auto-smoothing (when enabled) is only effective if the character
expansion rate is at least (3) times in each direction.
2. Characters may be enlarged through the use of the <ESC>L
Character Expansion command (see Page 5-21).
Section 5. Programming Reference
Page5-329001038Rev.DSATOXLSeriesPrinters