Operator`s manual

Special Notes 1. Use the Print Position commands (V and H) to locate the new area
for the duplicate image (see Page 5-50).
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axes will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
XL400 XL410
Horizontal
aaaa
cccc
0001
to
0800
0001
to
1200
Vertical
bbbb
dddd
0001
to
1920
0001
to
2880
Section 5. Programming Reference
SATOXLSeriesPrinters9001038Rev.DPage5-27