Operator`s manual

Printer Output
Special Notes 1. When printing the custom character using the Recall command, the
character is affected by the following commands:
Character Expansion (see Page 5-21)
Character Pitch (see Page 5-23)
Line Feed (see Page 5-44)
Rotate, Base Reference Point Fixed (see Page 5-59)
2. The characters are stored in volatile memory and must be reloaded
if the printer power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
Section 5. Programming Reference
Page5-209001038Rev.DSATOXLSeriesPrinters