Operator`s manual

Special Notes 1. UPC and EAN bar codes are not affected by the different types of
narrow to wide ratios. Instead, the <ESC>D command adds
descender bars to these codes where needed to meet UPC
specifications. The <ESC>BD command places decender bars in
the symbol.
2. The Code 128 and UCC 128 bar codes are not affected by the
narrow to wide ratios.
3. The Codabar and Code 39 bar codes are affected by the Character
Pitch command. This command must be placed before the Bar
Code command.
4. See Appendix B for more specific instructions and detailed
information regarding individual bar code symbols.
5. Because of their unique characteristics, two-dimensional symbols
are covered separately (see page 5-89).
6. For UCC128, the FNC1 code is automatically inserted and the Mod
10 and Mod 103 check digits are automatically calculated.
Section 5. Programming Reference
Page5-129001038Rev.DSATOXLSeriesPrinters