Operator`s manual

Print Speed Adjustment
There are three SPEED settings on the XL410 (4 ips, 5 ips and 6 ips) and four on the
XL400 (5 ips, 6 ips, 7 ips and 8 ips). They are listed on the bottom line of the display.
The current setting is indicated by an underline cursor under one of the speed
settings. To change the setting:
1. Use the START/STOP key to step the underline cursor to the desired speed setting.
2. Once the correct setting is underlined, press the FEED key to advance to the next
adjustment.
Note: This command can be overriden by software command (see Print Speed, page
5-53).
See Section 4: CLEANING AND MAINTENANCE, for additional information on how to
make this adjustment for optimum print quality.
VH Offset
The Vertical and Horizontal offset allows you to move the label image both
horizontally and vertically to position a label format correctly on a label. This allows
you to use smaller label formats on media which is larger than the original format
called for without having to individually correct each H and V field positions in the
command stream. It is the same effect as using the <ESC>A3 Base Reference Point
command (page 5-17).
1. Use the START/STOP key to select the vertical direction (“+” or “-”).
2. Once the correct direction is displayed, press the FEED key to accept the setting
advance to the vertical setting adjustment.
3. The underline cursor is now positioned under the least significant digit of the V offset
setting. The vertical offset will increase each time the START/STOP key is pressed.
If the START/STOP key is pressed and held down, the value will count up rapidly.
4. Once the correct vertical offset is displayed, press the FEED key to accept the setting
and advance to the horizontal setting adjustment.
5. Use the START/STOP key to select the horizontal direction (“+” or “-”).
6. Once the correct direction is displayed, press the FEED key to accept the setting
advance to the horizontal setting adjustment.
PRINT SPEED
4
56
VH OFFSET
V:
+000 +H: 000
Section 3. Printer Configuration
SATOXL SeriesPrinters9001038 Rev. DPage 3-9