Operator`s manual

OPERATOR PANEL
The XL Operator Panel consists of three LED indicators and five key switches. They
are used to set the printer operating parameters and to indicate the status of the
printer to the operator.
On Line: LED. Illuminated when the printer is ready to receive
data.
Cutter On/Off: LED. Illuminated when the Cutter is enabled.
Error: LED. Illuminated when there is a system fault such as
an open print head.
LCD Display: 2 Line x 16 Character LCD display. Used for setting
operational parameters of the printer.
Start/Stop: Toggles the printer On and Off Line.
Feed: Momentary Switch. Feed one tag or label each time it
is pressed. Effective only when printer is Off Line.
Cutter On/Off: Momentary Switch. Enables or disables the cutter.
Effective only when printer is Off Line.
Eject: Momentary Switch. When pressed, feeds out any
printed labels. If the cutter is enabled, it feeds and cuts
the label or tag.
Media Type: Momentary Switch. Steps through the media types.
Error LED
LCD Display
Start/Stop
Feed
Eject
Cutter
On/Off
Cutter On/Off LED
On Line LED
Media
Type
SATO XL PRINTER
Section 2. Installation
Page 2-69001038 Rev. DSATOXL SeriesPrinters