Operator`s manual

STACKER
The Integrated Stacker option can stack up to 500 tags at the maximum print speed
of the XL400 or XL410. It obtains its power through the EXT Accessory port connector
on the rear of the XL printer.
SPECIFICATIONS
XL Printer
Stacker
Interface Cable
Stacker
EXT Connector
Alignment
Plate
Media Tag (Center/Side Hole, Side Notch or I-Mark)
Size 9.4" W x 9.7" D x 11.6" H
238mm W x 253mm D x 294mm H
Weight 7.7 lb. (3.5 Kg)
Stack Type Stack Up
Capacity Maximum of 500 pieces, +/- 50
Tag Size 1.0" (26mm) to 5.9" (150mm)Long
1.26" (32mm) to 3.9" (100mm)Wide
Interface 14 Pin Centronics type
Synchronization With Print Cycle via EXT port with Stack Full detection
Appendix D: Optional Features
Page D-49001038 Rev. DSATOXL SeriesPrinters