Operator`s manual

ERROR DESCRIPTION INDICATION REMEDY
Low Battery - Low battery
condition is detected when
printer is powered on.
ERROR LED: Blinking
Audible Beep: 1 long
Display:Card Low Battery
Depress START/STOP key
to print Card Status.
Replace Memory Card
battery. Note that all data
will be lost when the battery
is removed.
Card R/W Error
1. No card is inserted.
2. Card is write protected.
3. Invalid store/recall
number.
4. Card has not been
initialized.
ERROR LED: On
Audible Beep: 1 long
Display:Card R/W Error
Printer must be powered off
to reset.
1. Insert card into selected
slot.
2. Remove write pro.tect
tab.
3. Correct program
4. Initialize card with BJF
command
Warning
1. Duplicate number.
2. Data not in print area.
3. Data overflows card
memory.
Audible Beep: 1 short
Display: None
Printer will ignore invalid
commands.
1. Correct program.
2. Correct program.
3. Use card with more
capacity.
Appendix D: Optional Features
SATOXL SeriesPrinters9001038 Rev. DPage D-3