Operator`s manual

the WIND option on the rewinder, and when ready to begin, set the power switch to
ON.
PCMCIA MEMORY CARDS
Description
The Memory Card Option provides the connectors and interface board for two
PCMCIA memory cards slots. The two Memory Card slots, labeled A and B, are
accessible on the Back Panel. Each card slot can have a standard PCMCIA memory
card installed with a maximum of 2MB each, allowing the printer memory to be
expanded up to 4MB.
Type RAM or Flash-ROM
Applicable Specifications PCMCIA Version 2.1 (JEIDA Version 4.1)
Size 128KB, 256KB, 512KB, 1MB or 2MB
Connector Pins 68
Battery Two years for SCAM type (approximately)
Write Protect Yes
Low Battery Detect Yes
Installation
Instructions for installing the Memory Card Option are included with the installation
kit.
Error Handling
Memory Card error conditions are indicated to the operator using a combination of
the ERROR LED on the front panel, the LCD display (if available) and the audible
indicator.
Memory Card Slots
Appendix D: Optional Features
Page D-29001038 Rev. DSATOXL SeriesPrinters