Operator`s manual

XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
Page 5-28
Z Stop Code. Ends all print jobs. Page 5-63
%a Rotate - Fixed Base Reference Point. Rotates printing in 90°
increments without changing the base reference point.
a = 0 Sets print to normal direction
1 Sets print to 90° CCW
2 Sets print to 180° rotated (upside down)
3 Sets print to 270° CCW (90° CW)
Page 5-59
$a,b,c,d Vector font. Specifies printing of the unique SATO vector font.
a = A Helvetica Bold (proportional spacing)
B Helvetica Bold (fixed spacing)
b = Font width (50-999 dots*)
c = Font height (50-999 dots*)
d = Font variation (0-9) as follows:
0 Standard
1 Standard open (outlined)
2 Gray (mesh) pattern 1
3 Gray (mesh) pattern 2
4 Gray (mesh) pattern 3
5 Standard, shadow 1
6 Standard, shadow 2
7 Standard mirror image
8 Italic
9 Italic open (outlined)
Page 5-30
$=(data) Data for Vector font. Page 5-30
#Ea Print Darkness. Specifies a new print darkness setting. The lightest
setting is “1”.
Page 5-49
XL400 XL410
a = Print Darkness 1, 2 or 3
(aaaa,bbbb Reverse Image. Reverse image from black to white and vice versa.
Units of measure are dots.
Page 5-57
XL400 XL410
aaaa = Horizontal Length 0001-0800 0001 - 1200
bbbb = Vertical Length 0001-1920 0001-2880
& Store Form Overlay. Stores a specified label image in the printer’s
volatile form overlay memory.
Page 5-37
/ Recall Form Overlay. Recalls the label image from the printer’s form
overlay memory for printing.
Page 5-36
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Code Quick Reference
Page A-69001038 Rev. DSATOXL SeriesPrinters