Operator`s manual

Qaaaaaa Print Quantity. Specifies the total number of labels to print.
aaaaaa = Total number of labels to print for the job
(000001-999999)
Page 5-52
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printer’s volatile memory. See Kab90cc to
recall the character for printing.
a = 1 16 x 16 matrix
2 24 x 24 matrix
b = Specifies data stream format to follow
B Binary
H Hexadecimal
cc = Memory location to store the character.
Valid locations are 21 to 52 or “!” to “R” in hex values.
(data)= Data to describe the character.
Page 5-19
Vbbbb Vertical Position. Specifies a field’s vertical location down the length
of the label from the current base reference point. Units of
measurement are dots.
Page 5-50
XL400 XL410
bbbb = New Vertical Position 0001-1920 0001-2880
WDHaaaaVbbbb
XccccYdddd
Copy Image Area. To copy an image to another location of the label.
aaaa = Horizontal position of the top left corner of image area
bbbb = Vertical position of the top left corner of image area
cccc = Horizontal length of image area
dddd = Vertical length of image area
Page 5-26
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-32
XCS, Font Type. Specifies the 24W x 24H dot matrix Care Symbol
character font.
Page 5-34
XCL, Font Type. Specifies the 36W x 36H dot matrix Care Symbol
character font.
Page 5-34
XLa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-32
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
Page 5-28
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
Page 5-28
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Code Quick Reference
SATOXL SeriesPrinters9001038 Rev. DPage A-5