Operator`s manual

Haaaa Horizontal Position. Specifies a field’s horizontal location across the
width of the label from the current base reference point. The units of
measurement are dots.
Page 5-50
XL400 XL410
aaaa = New Horizontal Position 0001-0800 0001-1200
Ia Batch Separator. generates a batch separator.
a = 1 Prints the first tag 2mm longer. The following tag will be
2mm shorter.
= 2 Prints an ink mark on the side of the first tag.
Page 5-16
IDaa Store Job ID. Stores the Job ID number.
aa = Job ID number assigned (01-99)
Page 5-41
Kab90cc Recall Custom Designed Characters. Recalls for printing a custom
character stored by the Tabcc(data) command.
a = 1 16 x 16 matrix
2 24 x 24 matrix
b = Indicates the format that data stream was stored in
B Binary
H Hexadecimal
bb = Memory location where the character was stored.
Valid locations are 21 to 52 or “!” to “R” in hex values.
Page 5-38
Laabb Character Expansion. Expands characters in both directions.
aa = Multiple to expand horizontally (01-12)
bb = Multiple to expand vertically (01-12)
Page 5-21
LD,a,b,c,d,e,f,g,i Download Protocol Command Codes. Downloads a user defined set
of Alternate Protocol Command Codes. See Appendix E for details on
the proper usage of this command.
Page 5-87
OA Font type. Specifies the OCR-A font with dot matrix. Page 5-28
XL400 XL410
OA Font Matrix 15W x 22H 22W x 33H
OB Font type. Specifies the OCR-B font dot matrix. Page 5-28
XL400 XL410
OB Font Matrix 20 W x 24H 30W x 36H
Paa Character Pitch. Designates the number of dots between characters.
aa = Number of dots between characters (01-99)
Page 5-23
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Code Quick Reference
Page A-49001038 Rev. DSATOXL SeriesPrinters