Operator`s manual

BDabbcccd Bar Codes. Prints a 2:5 ratio bar code, except for UPC, EAN, Code
128 and UCC128 symbols, which are fixed width bar codes. For values
a, bb, ccc and d see instructions for Babbcccd.
For UPC/EAN bar codes, this command puts descender bars and
humand readable text below the symbol.
Page 5-11
BTabbccddee Bar Codes - Variable Ratio. provides the ability to print a bar code
with a ratio other than those specified through the standard bar code
commands (B, BD, and D).
a = Bar code option:
0 Codabar
1 Code 39
2 Interleaved 2 of 5
bb = Narrow space in dots (01-99)
cc = Wide space in dots (01-99)
dd = Narrow bar in dots (01-99)
ee = Wide bar in dots (01-99)
Page 5-14
BWaabbb Bar Codes - Expansion. Works together with the BT command to
specify an expansion factor and the bar code height for the particular
symbol being printed.
aa = Expansion factor by which the width of all bars and spaces
is increased (01-12)
bbb = Bar height by dot (005-600 dots)
Page 5-13
C Repeat Label. Prints a duplicate of the last label printed. Page 5-54
CSa Print Speed Selection. Specifies a unique print speed in in./sec.
through software for a particular label.
Page 5-53
XL400 XL410
a = Speed Setting 5 = 5 ips
6 = 6 ips
7 = 7 ips
8 = 8 ips
4 = 4ips
5 = 5 ips
6 = 6 ips
Dabbcccd Bar Codes. Prints 1:2 ratio bar code. For UPC and EAN bar codes,
this will add descender bars. For values a, bb, ccc and d see
instructions for Babbcccd.
Page 5-11
Eaaa Line Feed. Provides the ability to print multiple lines of the same
character size without specifying a new print position for each line.
aaa = Number of dots (1-999) between the bottom of the
characters on one line to the top of the characters on the
next line.
Page 5-44
EJ Tag Feed. Causes a Tag to be fed out of the printer. If the cutter is
enabled, it will feed and cut the tag.
Page 5-64
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Code Quick Reference
Page A-29001038 Rev. DSATOXL SeriesPrinters