Operator`s manual

ACCESSORY (EXT) CONNECTOR
The Accessory (or EXT) connector on the XL printer rear panel is intended for use
with the external rewinder or stacker.
PIN ASSIGNMENTS
PIN DIRECTION SIGNAL DESCRIPTION
1 No Connection
2 Reference Signal Ground
3 To Rewinder Enables the Rewinder.
4 No Connection
5 To Printer Full Switch - Stops the printer when the stacker or rewinder is full.
6 To Stacker Enables the stacker.
7 No Connection.
10 No Connection.
12 To Host +24V - Used to power accessory items.
13 To Host Vcc - +5V
14 Reference Frame Ground
Section 6. Interface Specifications
Page 6-109001038 Rev. DSATOXL SeriesPrinters