Operator`s manual

Memory Card Function
Initialize
Command Structure <ESC>BJFaaaaaaaa
aaaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsatocard
Placement: Immediately following the <ESC>CC Slot Select
command.
Default: None
Command Function This clears all of the data from Memory Card in the specified slot and
prepares the card to accept data.
Input to Printer
<ESC>A
<ESC>CC2<ESC>BJFsatocard
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. You must have the optional memory card to use this command. Call
your local SATO representative for information.
2. All Memory Cards must be initialized before they can be used for
the first time.
3. Care should be exercised when using this command as it destroys
any data previously written to the card. It will clear all data from
the card and assign the new ID (“satocard” in the above example).
4. If the Memory Card is write protected, a Mmemory Card R/W Error
will occur.
Section 5. Programming Reference
Page5-849001038Rev.DSATOXLSeriesPrinters