Operator`s manual

7. If a job contains elements out of the memory range, it is ignored.
8. This command cannot be used with the <ESC>AX and <ESC>AR
Expanded Print Length commands or the <ESC>R Rotate,
Moving Base Reference Point command.
XL400 XL410
Standard Print Length 1920 dots
9.5 in.
240 mm
2880 dots
9.5 in.
240 mm
Maximum Length with Memory Card
(2)
128 Kbyte 1168 dots
5.7 in.
146 mm
743 dots
2.4 in.
62 mm
512 Kbyte 4768 dots
23.5 in.
596 mm
2977 dots
9.7 in.
248 mm
1 Mbyte 9360 dots
46 in.
1170 mm
5956 dots
19.5 in.
496 mm
2 Mbyte 9999 dots
(1)
49.2 in.
1249 mm
9999 dots
(1)
32.8 in.
833 mm
(1) Limited by the number of digits in the command field.
(2) When a Memory Card is used to expand the print length, the card capacity is
used instead of the internal memory, not in addition to the internal memory.
Section 5. Programming Reference
Page5-749001038Rev.DSATOXLSeriesPrinters