Operator`s manual

Rotate, Fixed Base Reference Point
Command Structure <ESC>%a
a = 0 Sets print to normal direction
1 Sets print to 90°CCW
2 Sets print to 180° rotated (upside down)
3 Sets print to 270° CCW
Example: <ESC>%3
Placement: Preceding any printed data to be rotated
Default: <ESC>%0
Command Function To rotate the print direction in 90° increments without changing the
location of the base reference point. The diagram below illustrates the
use of the <ESC>% Rotate command. Note that the entire print area
is shown, but your label will probably not be as large as the entire
area.
Input to Printer
<ESC>A
<ESC>%0<ESC>L202<ESC>H0200<ESC>V0100<ESC>XMNORMAL DIRECTION
<ESC>%1<ESC>H0200<ESC>V0300<ESC>XMONE
<ESC>%2<ESC>H0200<ESC>V0400<ESC>XMTWO
<ESC>%3<ESC>H0200<ESC>V0500<ESC>XMTHREE
<ESC>Q1<ESC>Z
Printer Output
Section 5. Programming Reference
SATOXLSeriesPrinters9001038Rev.DPage5-59