Operator`s manual

2. For print lengths greater than 9.5 inches, an optional Memory Card
must be used.
3. If any part of an image is placed past the maximum number of dots
for standard length and or the capacity of the memory card, that
part of the image will be lost.
4. If any part of an image is placed past maximum allowable dots
across the label, that part of the image will be lost.
5. If you attempt to print where there is no paper, you may damage
the print head.
6. For these commands, the leading zeroes do not have to be
entered. The command V1 is equivalent to V0001.
XL400 XL410
Maximum Print Width
aaaa
800 dots
3.9 in.
100 mm
1200 dots
3.9 in.
100 mm
Standard Print Length
bbbb
1920 dots
9.5 in.
240 mm
2880 dots
9.5 in.
240 mm
Maximum Length with Memory Card
(2)
128 Kbyte
bbbb
1168 dots
5.7 in.
146 mm
743 dots
2.4 in.
62 mm
512 Kbyte
bbbb
4768 dots
23.5 in.
596 mm
2977 dots
9.7 in.
248mm
1Mbyte
bbbb
9360 dots
46 in.
1170 mm
5956 dots
19.5in.
496 mm
2Mbyte
bbbb
9999 dots
(1)
49.2 in.
1249 mm
9999 dots
(1)
32.8 in.
833 mm
(1) Limited by the number of digits in the command field.
(2) When a Memory Card is used to expand the print length, the card capacity is
used instead of the internal memory, not in addition to the internal memory.
Section 5. Programming Reference
SATOXLSeriesPrinters9001038Rev.DPage5-51