Operator`s manual

Print & Cut Offset
Command Structure <ESC>#abbbb
a = Offset Direction
+ Feed Direction (plus offset)
- Reverse Direction (minimum offset)
bbbb = Number of dots for offset (000 to 400)
Example: <ESC>#+40
Placement: In data stream for job
Default: None
Command Function To move the tag cut position.
Printer Input
<ESC>A
<ESC>#+040
<ESC>V0100<ESC>H0200<ESC>P2<ESC>L0202<ESC>WB1ABCD
<ESC>Q3<ESC>Z
Special Notes 1. This command can be specified for every print job and keeps the
specified value in memory as long as power is on.
Section 5. Programming Reference
Page5-489001038Rev.DSATOXLSeriesPrinters