Operator`s manual

Off-Line/Pause
Command Structure <ESC>@,nnn...n
nnn...n = Display message, up to 32 ASCII characters
Example: See above
Placement: In its own data stream
Default: None
Command Function To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
Input to Printer
<ESC>A
<ESC>@,LoadBlueTags-1"Wby3"L
<ESC>Z
Printer Output There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
Special Notes 1. You must press the START/STOP key on the front panel to return
the printer to an on-line status (see Control Panel in Section 3 of
this manual).
2. Can be used before or after a print job.
Section 5. Programming Reference
SATOXLSeriesPrinters9001038Rev.DPage5-47