Operator`s manual

GENERAL PRINTER SPECIFICATIONS
SPECIFICATION XL400 XL410
PRINT
Method Direct or Thermal Transfer
Speed (User Selectable) 5 to 8 ips
125 to 200 mm/s
4 to 6 ips
100 to 150 mm/s
Print Module (Dot Size) .0049 in.
.125 mm
.0033 in.
.083 mm
Resolution 203 dpi
8 dpmm
305 dpi
12 dpmm
Maximum Print Width 3.94 in.
100 mm
Maximum Print Length 9.45 in.
240 mm
Maximum Print Length
with 2MB Memory Card
49.2 in.
1249 mm
32.8 in.
833 mm
MEDIA
Minimum Width 1.26 in. (32 mm)
Minimum Length .75 in. (19 mm) Labels
1.0 in. (25 mm) Tags
Maximum Width 4.0 in. (102 mm)
Type Die Cut Labels, Fan-Fold, Tag Stock or Continuous
Caliper (max) .012 in. (.3 mm)
Roll OD (max) 9.8 in. (249 mm)
Core ID (min) 4.0 in. (102 mm)
SENSING
See-Thru
Label Gap/Center Hole Tag
Side Hole Tag
Side Notch (R-Corner Tag)
Adjustable
0.4 in. (16mm0 to 2.0 in. (50mm)
1.3 in. (34mm) to 3.7 in. (94mm)
0.1 in. (2.5mm)
Reflective Eye-Mark
Eye-Mark Label or Tag
Fixed
0.28 in. (7 mm)
RIBBON
Maximum Width 4.0 in. (102 mm)
Length 1475 ft. (450 M)
Wind Ink-In
Thickness 4.5 micron
Section 1. Printer Overview
Page 1- 29001038 Rev. DSATOXL SeriesPrinters