Spec Sheet

GENERAL SPECIFICATIONS
M84Pro Series
PRINTER MODEL M84Pro(2) M84Pro(3) M84Pro(6)
PRINT SPECIFICATIONS
Printing Method Thermal Transfer/ Direct Thermal
Print Resolution 203 dpi (8 dots/mm) 305 dpi (12 dots/mm) 609 dpi (24 dots/mm)
Printing Speed
10 ips (254 mm/sec) 8 ips (200 mm/sec) 6 ips (150 mm/sec)
Print Area Max Width 4.1" (104 mm)
Max Length 49.2" (1249 mm) 32.8" (833 mm) 14" (356 mm)
Min Length 0.24" (6 mm) - continuous / 0.63" (16 mm) - tear off / 1.18" (30 mm) - cutter/dispenser
MEDIA SPECIFICATIONS
Sensor Type Adjustable transmissive sensor for gap, Reflective sensor for black mark, Automatic, programmable top of form,
Label present sensor (opt. w/dispenser), Ribbon-out sensor
Media Type Roll-fed or fanfold, die-cut or continuous direct thermal (thermal transfer) labels, synthetics,
and tag stock with or without black mark, gap, or notch.
Media Width Maximum 5" (128 mm) / Minimum 0.87" (22 mm)
Media Specs Caliper Maximum 0.01" (0.25 mm)
Roll Diameter Maximum 8.6" (218 mm)
Wind Face In
Maximum Ribbon Size 4.4" (111 mm) W x 1475' (450 m) L - Face In
MEMORY/PROCESSING
Standard 16 MB RAM, 2 MB Flash
Optional 4 MB Flash, 1 MB or 256 K PCMCIA
Processor 32-BIT RISC
COMMUNICATION INTERFACES
Plug-in Interface Serial - RS232 (up to 57.6k bps), Parallel - IEEE1284 (ECP), Ethernet - 10/100BaseT, Wireless 802.11g,
Twinax/Coax, RS422/485, USB (Factory Installed)
FONT/BARCODE SYMBOLOGIES
Fonts Bitmap - 12 proportional, mono-spaced and outline fonts (Code table 858), Scalable Internal CG Triumvirate
®
and CG Times
®
Fonts, Optional Downloaded TrueType
®
fonts, scalable from 8 to 72 points
Barcodes Linear UPC-A, UPC-E, EAN-8, EAN-13, Code 39, Code 93, Code 128, Codabar, MSI, Bookland, Industrial 2/5, Interleaved 2/5,
Matrix 2/5, Postnet™, GS1-128, GS1-DataBar™
2-D PDF417, Micro PDF417, Truncated PDF417, Maxicode™, Data Matrix, QR Code, Composite Symbology
Formatting 360° rotation of barcodes and text, horizontal and vertical character expansion, sequential numbering
and form overlay for high-speed editing of complex formats
SUPPORT
Graphic Printing and storage of *.PCX, *.BMP format, SATO Hex/binary
Software Windows
®
Drivers (Windows
®
2000, XP, 2003, Vista and Windows 7), Label Software (Label Gallery Free) and Printer Utilities
OPERATING & ENVIRONMENTAL
Electrical Requirements 115V/220V (± 10%), 50/60 Hz (± 1%) - Jumper switch required
Agency Certications CE, UL, CSA, TÜV
Environment Operating 41° to 104°F (5° to 40°C), 15-85% RH, non-condensing
Storage 23° to 140°F (-5° to 60°C), Maximum 90% RH, non-condensing
EDS 8kV
Dimensions
10.4" (265 mm) W x 17.1" (435 mm) D x 13.4" (341 mm) H
Weight
39.7 lbs (18 kg)
OPTIONAL FEATURES
Label Cutter, Label Dispenser, Label Rewinder, Memory Expansion, Real Time Clock, Plug-In Interface, Label Gallery
www.satoamerica.com
©2014 SATO America, Inc. All rights Reserved. Rev G • Any unauthorized reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered
trademark of SATO Corporation and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.
CORPORATE
10350-A Nations Ford Rd
Charlotte, NC 28273
Phone: [phone]
Fax: [phone]
[e-mail]
UNITED STATES MEXICO
CANADA
LABEL MANUFACTURING, SERVICE & SALES
CENTRAL AMERICA
CARIBBEAN