Instruction manual

Precautions for Installation and Handling
6
Printer operation can be affected by the printer environment.
Refer to the following instructions for installation and handling of TH208.
Place the printer on a surface that is flat and
level.
Select a Safe Location
Power Supply (When using an AC adapter)
If the surface is not flat and level,
this may result in poor print
quality. This may also cause
malfunction and shorten the life
span of the printer.
Keep the printer out of high temperature and
humidity.
Avoid locations subject to
extreme or rapid changes in
temperature or humidity.
Exposure to these conditions
may cause electrical problems
within the printer.
Do not place the printer on a location that
produces vibration.
Do not carry the printer when the
roll label is set. Giving serious
vibration or shock to the printer
may cause malfunction and
shorten the life span of the
printer.
Do not place the printer in a location subject
to water or oil.
Do not place the printer in a
location where it will be splashed
with water or oil. Water or oil
entering inside the printer may
cause a fire, electric shock, or
malfunction.
Do not place the printer near crane or
pressing machine.
Machineries such as crane and
pressing machine require large
amount of power. This may
cause electrical noise or voltage
reduction.
Avoid such locations to reduce
the risk of malfunction or damage
to the printer.
Avoid dust.
Dust buildup may result in poor
print quality. This may cause not
only malfunction but also shorten
the life span of the printer.
Keep out of direct sunlight.
This printer has a built-in optical
sensor. Exposure to direct
sunlight will make the sensor
less responsive and may cause
the label to be sensed
incorrectly. Close the cover when
printing.
This printer requires an AC power supply.
Be sure to connect the printer to
an AC power supply via the
supplied AC adapter.
Failure to do so may result in
miss operation or a malfunction.
Provide a stable source of electricity to the
printer.
Do not share the power outlets with other appliances
such as a heater and refrigerator requiring a
measurable amount of power. Also, avoid using the
power outlet near where such appliances are
plugged into. This may cause voltage reduction and
malfunction.
Connect the power cord to a grounded power
outlet.
Make sure to have the facility
equipped with the ground slot.
Ground
English