Instruction manual

13
Charging time
It takes about 6 hours for the CHARGE LED to turn off when
charging a completely depleted battery.
The AC adapter set provided for this printer is specific to this printer.
Do not use it for other electric equipment.
Use only power supplies listed in the Basic Specifications.
• Charging by installing the supplied AC adapter on the printer
This charges the battery pack while it is installed in the printer.
Note
•
When the CHARGE lamp is not lit, check that the battery pack is installed
securely.
The battery may not be charged when not securely installed.
•
When a charged battery pack is installed, the CHARGE lamp first lights red,
then lights green.
1. Insert the DC power cord into
the DC input terminal.
2. Connect the power cord to the
AC adapter and plug it to the
outlet.
When charging begins, the
CHARGE LED lights.
When charging is complete,
the CHARGE LED turns off
(fully charged).
DC input
terminal
AC adapter
English