Instruction manual

Section 1: Accessories and Names of Parts
TH208 Quick Guide Page 1-5
PARTS IDENTIFICATION (cont’d)
26
24
21
25
19
20
22
23
27
Internal view when Top cover is opened
Dispensing sensor (Label taken sensor)
Detects the label is taken away after
dispensed.
Print head
This component is used to print on the media.
Perform maintenance at regular intervals.
Gap sensor
Detects the gap of the label.
Roll media holder
To hold the roll media and adjust it to meet the
size of the media used.
Media guide
A guide for the media to feed properly.
Make sure the media guides are adjusted to
both edges of the label roll.
I-Mark/ Gap sensor
Detects the I-Mark on the media or gap of the
label.
Platen roller
This roller feeds the media. Perform cleaning
maintenance at regular intervals.
Dispenser/ Tear off plate
Used to separate the label from the liner or to
tear off the journal paper.
Pressure bracket
To hold the dispensing roller for label liner
(backing paper) movement.
19
20
21
22
23
24
25
26
27