Instruction manual

Section 3: Configuration and Operation
Page 3-72 TH2 Series Operator Manual
3.8 ADVANCED SETUP MENU (Cont’d)
Menu Description
Input old password and press enter button.
Input new password and press enter button.
Confirm new password and press enter button.
RESET menu.
Enables the selection of 1.Setup or 2.SD Card.
Select 1.Setup to reset the printer Setup to factory default.
Select 2.SD Card to format the installed SD Card.
Confirm RESET.
If No is selected printer, returns to RESET menu.
If Yes is selected, printer Setup will be reset to factory default or printer SD Card
will be formatted.
The printer will take a few seconds to restore printer factory default Setup or for-
matting the SD card.
The screen will show Formatting card when resetting the SD Card.
When selecting 6.Console from ADV SETUP menu, Command mode is dis-
played on the screen.
If RESET is performed before selecting and confirming Console, the printer will
reboot.
This is the mode used only by application developers when developing applica-
tions. In this mode standard Lua commands and SATO's developed Lua API
commands can be sent to the printer via USB, LAN or WLAN forming an appli-
cation.
Only power button can be activated to leave the mode.
USB menu.
Enables the selection of 1.Number from USB menu.