Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-71
3.8 ADVANCED SETUP MENU (Cont’d)
1. Make sure the power of the printer is turned off.
2. Press and hold the enter button and then press the power button to turn on the printer. Release the
enter button only when a long beep sound is heard.
3. Password is required before entering to ADV SETUP menu. PASSWORD input screen is displayed.
The default passwords are 6677 (MANAGER) and 96726 (ADMIN). These two passwords can be changed
in the later procedure.
Enter the password with the numeric buttons and then press button.
4. ADV SETUP menu is displayed, select the desired option from the list.
Menu Description
ADV SETUP menu.
Enables the selection of 1.Start App., 2.Setup, 3.Hex Dump, 4.Change PW,
5.Reset, 6.Console, 7.USB, 8.Disp adj. (Cutter adj.) or 9.Continue.
Note:
If a cutter is installed, the menu choice #8 will be 8. Cutter adj.
START APP menu.
Enables selection from a list of customer applications to choose as start-up
applications.
The list may vary according to the number of customers applications.
This display shows the selection of 1.Standard as general.
Enables access to Printer SETUP menu.
Please refer to Section 3.7 Printer Setup Menu for details.
Hex Dump menu.
The printer will output hexadecimal values of data that is sent from a host com-
puter over USB, LAN or WLAN. Output can be to a printed label or to a file that
is stored in the temporary RAM file system of the printer.
Enables the selection of 1.Printout or 2.To File.
When 1.Printout is selected, the printer will output hexadecimal values of the
data that is sent from a host computer over USB, LAN or WLAN.
The HEX Dump output will be printed on the label.
When 2.To File is selected, the hex dump is saved to the temporary RAM file
system of the printer. The file path is /tmp/dump.bin. Dump.bin is the binary file
name.
CHANGE PW menu.
Enables the selection of 1.admin or 2.manager.