Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-67
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
If the value is acceptable, Saved will be displayed when enter button is
pressed.
Note:
The password is readable as long as you stay inside the NETWORK menu.
When leaving and re-entering the menu the PSK is symbolized by 4 stars ****
regardless of its length.
EAP or DYNAMIC WEP menu.
Enables the selection of 1.Username, 2.Password or 3.EAP Type.
Username is the username used in the EAP/ Dynamic WEP authentication pro-
cess.
Displays input field and enables input of Username.
Allowed input: 1 to 63 character string.
Note:
If the input field is left empty, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
Press enter button again to leave the menu.
PASSWORD is the password used in the EAP/ Dynamic WEP authentication
process.
Displays input field and enables input of PASSWORD.
Allowed input: 0 to 32 character string.
Note:
If the value is outside the allowed limits, Invalid will be displayed.
If the value is outside the allowed limits, Saved will be displayed when
enter button is pressed.
Press enter button again to leave the menu.
Note:
The password is readable as long as you stay inside the NETWORK menu.
When leaving and re-entering the menu the password is symbolized by 4 stars
**** regardless of its length.
Displays existing EAP TYPE selection and enables new selection.
Enables the selection of 1.PEAP, 2.LEAP, 3.TTLS or 4.TLS.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.