Instruction manual

Section 3: Configuration and Operation
Page 3-66 TH2 Series Operator Manual
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
INFRASTRUCTURE menu.
Enables the selection of 1.None, 2.WEP, 3.WPA, 4.WPA2 or 5.Dynamic WEP.
The default selection is 1.None.
WEP menu.
Enables the selection of 1.Mode, 2.Index, 3.Key 1, 4.Key 2, 5.Key 3 or 6.Key
4.
Displays existing MODE setting and enables new selection.
Enables the selection of 1.Open system or 2.Shared key.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.
Displays existing INDEX setting and enables new selection.
Enables the selection of 1.Key 1, 2.Key 2, 3.Key 3 or 4.Key 4.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.
Displays input field and enables input of WEP KEY 1.
Allowed input: 5 or 13 character string alternate 10 or 26 digit hexadecimal.
Empty field is valid.
Note:
If the value is outside the allowed limits, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
Note:
The password is readable as long as you stay inside the NETWORK menu.
When leaving and re-entering the menu the key is symbolized by 4 stars ****
regardless of its length.
WPA or WPA2 menu.
Enables the selection of 1.PSK or 2.EAP.
PSK (Pre-Shared Key) menu.
Displays input field and enables input of PSK.
Allowed input: 8 to 63 character string.
Note:
If the value is outside the allowed limits, Invalid will be displayed.