Instruction manual

Section 3: Configuration and Operation
Page 3-56 TH2 Series Operator Manual
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
The ERROR SOUND menu can set the beep sound to be turned on or off when-
ever error occurred.
Displays existing ERROR SOUND setting and enables new selection.
The default setting is On.
The “pressed radio button” indicates the existing setting until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.
AUTO OFF menu.
Enables the selection of 1.AC or 2.Battery.
The AUTO OFF AC menu enables user to set the time after when the printer
automatically shuts down in AC mode.
Displays the AUTO OFF AC range and input field with existing value.
Setting range is between 0 and 300 min, and the default value is 0 min.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
The AUTO OFF BATTERY menu enables user to set the time after when the
printer automatically shuts down in battery mode.
Displays the AUTO OFF BATTERY range and input field with existing value.
Setting range is between 0 and 300 min, and the default value is 0 min.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
TEST menu.
Enables the selection of 1.Info or 2.Labels.
When TEST INFO is selected, the printer displays a series of printer information and status.
INFO LAN/WLAN is displayed only if LAN/WLAN is installed.
All buttons except Page up and Power will display next info screen.
After the last info screen the TEST menu is displayed.