Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-55
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
Printer SETUP menu.
Enables the selection of 1.Profile, 2.Media, 3.Print Ctrl, 4.System, 5.Regional
or 6.Network
Select 4.System for system settings.
SYSTEM menu.
Enables the selection of 1.Display, 2.Sound, 3.Auto Off or 4.Test.
DISPLAY menu.
Enables the selection of 1.Intensity or 2.Backlight.
The INTENSITY of the display can be adjusted in this menu according to your
preference.
Displays the INTENSITY range and input field with existing value.
Setting range is between 15 and 40, and the default value is 24.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
With BACKLIGHT setting, the display backlight can be turned on or off.
Displays existing BACKLIGHT setting and enables new selection.
The default setting is On.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.
SOUND menu.
Enables the selection of 1.Keyboard or 2.Error.
The KEYBOARD SOUND menu can set the beep sound to be turned on or off
whenever the button is pressed.
Displays existing KEYBOARD SOUND setting and enables new selection.
The default setting is On.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.