Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-53
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
With HEAD CHECK activated, the printer gives a warning if one or more dots
are broken.
Displays existing HEAD CHECK setting and enables new selection.
The default setting is Off.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.
Note:
If not printing barcodes, head error may not be considered serious. Turn off
HEAD CHECK to avoid un-necessary reminders.
AUTO FEED menu.
Enables the selection of 1.After Error or 2.Power On.
AUTO FEED/AFTER ERROR enables automatic feed after error in order to
ensure that media has the correct stop position before next print session.
Displays existing AFTER ERROR selection and enables new selection.
The default setting is Off.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.
AUTO FEED/POWER ON enables automatic feed after Power On in order to
ensure that media has the correct rest position before print session.
Displays existing POWER ON selection and enables new selection.
The default setting is Off.
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When enter button is pressed, the new selection is saved and the related
“radio button” is shown as pressed.